We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The FMDV008PA version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose.
Forge's recirculation valve features a greater flow rate than the OEM Bosch Valve, as well as a faster response time, due to our revised design. By using the associated service kit (FMDVSK), as seen below, the life of the valve can be extended, and the performance can be maintained. With a lifetime guarantee, you can be sure the valve is reliable for your car.
It is fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has a compact design, meaning easy fitment under the engine cover.
In The Box:
1 x FMDV008PA Valve
1 x Uprated Yellow Spring
1 x Uprated Blue Spring
1 x Cable Tie
1 x 2.5mm Allen key
2 x 35mm Hose Clamps
1 x Instruction Booklet
1 x Forge Sticker
The valve has a port size of 25mm. If you are unsure if this product is suitable for your application, please contact us.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Turbo Recirculation Valve with Adjustable Vacuum Port
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Induction Kit for the SEAT Ibiza, Skoda Fabia, and VW Polo 1.2TSI/1.4GT 2015 Onwards