- Forge designed and manufactured specifically for an engineered fit to your BMW Chassis.
- Utilising a solid works designed high flow hand manufactured end tanks.
- High density bar & plate construction air core.
- A simple and easy direct bolt on to the OEM position.
- Includes all hardware needed to install.
F20, F21 Chassis
118i ,120d ,120dX, 125d, 125i, 135i,
218d, 220d, 220i, 225d, 228i, 235i,
F30, F31, F34 Chassis
316d, 316i, 318d, 318dX, 320d, 320i, 320dX, 325d, 328i, 330d, 335d, 335i
F32, F36 Chassis
420d, 420dX, 420i, 420iX, 418d, 420d, 420dX, 420,i 420iX, 425d, 428i, 430d, 435d, 435i
This uprated intercooler has been designed for the BMW vehicles with the N55 3.0 single turbo engine and N54 twin turbo engine, we have again managed to retain a very easy installation (taking less than 45 minutes with no need to remove the bumper), but also NO cutting of any bodywork. With our testing results indicating a temperature drop of 25°C and of course the increase in power that you would expect from a much larger cooler charge, plus the ability to install this on your driveway at home, we have a truly excellent product.
After considerable trials with different intercoolers cores, we have again opted for a core of bar and plate design, and along with an overall increase in dimensions we have been able to drastically improve the cooling ability when compared to the factory intercooler. In the construction, we use CNC machined bayonet couplers which allow an easy plug and play install. The intercooler is supplied with easy to follow instructions.
Our before and after Dyno runs clearly show, not only the power increase, but the significant reduction in intake temperature.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product ReviewsBe the first to review this product
Want to leave a review?
Login Register FREE!
Intercooler for BMW F20, F21, F22, F23, F30, F31, F36, F87 Chassis
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.