The Forge Motorsport FMTUBL5 has been designed for the Fiat 500, 595, and 695 turbo (this will not fit those fitted with IHI turbo). This turbo blanket is designed to isolate the radiant heat produced by the turbocharger.
This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.
Simple to fit using existing OEM hardware.
Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.
· Stainless Steel Rivets
· Carbon fabric outer shell
· Calcium Magnesium Silicate Wool constructed Inner Core
· High temperature Silica fabric
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Turbo Blanket for Fiat 500, 595 and 695 (Not IHI Turbos)
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.