We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
A direct bolt on replacement Recirculation valve for the 2008 Subaru Impreza WRX with either the 2.0 litre or 2.5 litre engines.
Please note: This valve will not fit the 2008 STi.
Please also note: The original diamond shaped mounting bracket O-ring is to be retained and fitted to the Forge valve.
In The Box:
1 x FMWRX3 Valve
1 x Uprated Yellow Spring
1 x Uprated Red Spring
1 x 40mm Hose Clamp
1 x Instructions
1 x Forge Sticker
If you are unsure if this product is suitable for your application, please contact us.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Recirculation Valve for Subaru Impreza 2008 WRX
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Induction Kit for the SEAT Ibiza, Skoda Fabia, and VW Polo 1.2TSI/1.4GT 2015 Onwards