This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions.
This unit will fit VW/Audi/SEAT/Skoda (VAG) vehicles with the 5 speed transverse gear boxes (2000 onwards) as seen in the 'compatible vehicles' tab above.
This product is supplied with two sizes of pin and one ball fitment, to ensure that it will match the various possible cables found on these vehicles.
This WILL also fit the 6 speed 1.4 litre Twincharged engines as found in the Golf Mk5 , Golf Mk6 and Scirocco. On these vehicles it replaces the OEM part No. 1K0 711 046M.
This WILL NOT fit vehicles with AGU engine code
In The Box:
1 x FMVAG5QS Shifter
1 x 8.4mm Pin
1 x 10mm Pin
1 x Ball Pin
1 x 8mm Nut
1 x Bag of Grease
1 x Instructions
1 x Forge Sticker
This part is compatible with:
Audi A3/S3/Sportb./Lim./qu (2004 - 2013)
Audi A3 Cabriolet (2008-2013)
Volkswagen Beetle (2012-2016)
Volkswagen Beetle Cabrio (2013-2016)
Volkswagen Caddy (2004-2016)
Volkswagen CC (2012-2016)
Volkswagen Eos (2006-2016)
Volkswagen Golf Cabriolet (2012-2016)
Volkswagen Golf/Variant/4Motion (2004-2014)
Volkswagen Golf Plus (2005-2014)
Volkswagen Jetta/syncro (2006-2016)
Volkswagen Passat/4Motion/Santana (2008-2015)
Volkswagen Passat CC (2009-2012)
Volkswagen Scirocco (2009-2016)
Volkswagen Touran (2003-2016)
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.