The FMINDK33 is the new intake kit developed for the Kia Stinger GTS. Its open cone design allows for increased induction note which adds extra theatre to the driving experience of the 3.3L V6. With the use of the premium quality Ram Air filters and bespoke laser cut heat shrouds this kit not only sounds good, it looks good.
With the use of Solidworks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay and incorporating room for the strut bracing. This shroud protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filters.
The choice of filter was taken after weeks of testing and hours on the dyno experimenting with different filter options. We found that the Ram Air Pro Ram worked very well with an increase in power and torque, the build quality of the filter is also superb.This PRORAM performance filter has been designed with a high quality 5-ply silicone couplings and W2 Stainless Steel Hose clips to join the velocity stack to its powder coated alloy spinning. The filter is made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.
Installation of this product is straight forward for anyone with a modest tool set. As with all Forge Motorsport intake kits the FMINDK33 comes with extensive installation instructions to make the fitting of this product as easy as possible. And if there are any queries the Forge Technical team are all ways here to help.
Installation of this product is straight forward for anyone with a modest tool set. As with all Forge Motorsport intake kits the FMINDK33 comes with extensive installation instructions.
This filter is made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.
Why not add gold tape to the engine side of the aluminium shrouding to further reflect any heat soak from the engine. The Gold tape comes on a 5metre roll allowing you to apply it to your Forge product.
In the box:
2x Pro Ram Filters
1x Heat shroud (Right Side)
1x Heat shroud (Left Side)
2x Rubber O-rings
*Please note - the Ram Air filter is excluded from the Forge lifetime warranty*
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.