Company: Forge Motorsport

Intercooler for Volkswagen T5 1.9/2.5 and T5.1 2.0 TDI Single turbo

Product code: FMINTVWT5
£455.36

Please select product options and quantities below:

Currency Converter Currency Converter

Description

Product Description

Uprated front mounting intercooler for the VW T5 bus or van variants. Although significantly larger than the original intercooler, this unit is a direct plug in replacement requiring no additional hoses or pipework. With a larger front cross sectional area, the cooling/power recovery is improved. The unit offers a lower resistance, compared to OEM without adding turbo lag. On our own van we gained 10hp and 20 ft/lbs of torque with just the intercooler, and all who drive the vehicle since the installation have commented on how much better it feels.

For those that have used a tuning box, or have updated engine management software, this really is a must.

Stock Intercooler: 720x215x30

Forge Intercooler: 680x290x40

 

Fits the following engines: AXB, AXD, AXE, AXC, BRR, BRS, BNZ, BPC, BLU, CAAA, CAAB, CAAC, CAAD, CAAE, CCHA, CCHB.

 

This will aslo fit the new 2010 onwards Vw T5.1  2.0TDI single turbo  140bhp, 114bhp, 102bhp, 84bhp models.

Fitting Guides

VW T5.2

VWT5

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Tags

Volkswagen

Instructions

Warranty

Warranty Information

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please contact our customer service team.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

Shipping

Shipping Information

Shipping Charges & Services

We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.