The stock intercooler on the 208 GTi is the same compromised side mount intercooler used on the 207 GTi so we know its not up to the job even on a stock car. On a remapped engine with the stock intercooler we were seeing inlet temperatures of 105°C (215°F) – the highest we have recorded on any car ever! This has a huge detrimental effect on power and torque.
Our intercooler is a full replacement single pass (left to right) core which mounts to the stock crash bar in the car. The pipework supplied with our intercooler joins to the pipes that connect to the stock intercooler so installation is easy. The only cutting needed is to the ducting on the radiator to allow the pipework to pass through. All the silicon hoses, hard pipes, clips, bolts, nuts and jubilee clips needed to install the intercooler are included, along with full colour installation instructions.
Performance wise, the car we used had a Superchips remap. We tested the stock intercooler and the Forge intercooler back to back on the same day and the increases were dramatic
Intake temperature dropped form 105°C to 45°C - a drop of 60°C
Power went from 190bhp to 224 bhp – an increase of 34bhp
Torque went from 222 lbft to 244 lbft – an increase of 22 lbft
You can look at the dyno graph comparison of the intercooler showing the increase in performance, but PLEASE REMEMBER this was specific to the car we had in for testing, and you may not get the same results from a stock or mildly tuned car.
All parts necessary for installation are included, together will full instructions.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Turbo Blanket for Mini, Citroen DS3 (Pre 2016 Only), and Peugeot 207/208 GTI
Manufacturer: Forge Motorsport