Description
Product Description
FMDV44 for the Can-Am Maverick X3 Turbo RR includes a dump valve, heat shield, and a replacement for the turbo to intercooler boost hose. The kit includes all the necessary hardware and step by step installation instructions for the average car enthusiast to fit at home with average garage tools in just a couple of hours. Our valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger.
As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, the cleaver twin piston design prevents any running issues when at idle or on partial throttle while also preventing contamination entering the inlet tract, it also increases the throttle response during gear changes by reducing turbo lag, this complete BOV (blow off valve) solution has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate while also taking the additional strain away from the turbocharger impeller. As you can see from the image below without taking this stress away from your turbo it can lead to premature turbo failure especially on remapped engines and competition ATVs.
Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the OEM pipe can crack and deteriorate over time becoming susceptible to boost leaks and a lack of performance. This kit totally replaces this with a multi-ply silicone hose (available in black or blue), and everything else you need to install the valve is included in the kit together with full instructions.
- Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks.
- Unlike other valves on the market the Forge valve will not bring on any check engine lights. (EML)
- Forge Motorsport hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist.
Time taken to install - around 90 minutes
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Dump Valve for the Can-Am Maverick X3 Turbo RR
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.