Description
Product Description
This front mounting intercooler has been designed as an upgrade for the Nissan GTR R35 models. After extensive trials, we found that the most efficient for these models was a custom designed core of tube and fin design, and along with an overall increase in dimensions we have been able to improve the cooling ability dramatically. We make full use of the front opening of the bumper, and the top grill with billet heat sink on the end tanks to optimize cooling, unlike many others on the market. This gives a huge leap in efficiency and goes a long way to keeping intake temperatures down.
Our intercooler is a massive 165% larger than the stock intercoolers (i.e. more than two and a half times as big!). Our own testing was conducted on software and hardware tuned vehicles on a dyno and on track, to ensure that they would be working their hardest and the results showed both a reduction in inlet temperature, an increase in horsepower and torque, but with no detrimental effect on turbo spool-up. Very recent customer tests (July 2014) showed +48 bhp on an 920bhp GTR during a full power run on the dyno, with some tweaks to the mapping to allow for the cooler air and better flow the vehicle left with a gain of 65bhp making it a massive 985bhp. Inlet air temperature rose only 9 degrees above ambient making it our best performing intercooler ever!
This GTR intercooler kit is very comprehensive, supplied complete with all parts required, including mandrel bent 80mm pipework in black, new high capacity air filters, silicon hoses, all clips, bolts, and nuts together with comprehensive colour instructions. No cutting of the crash bar or any part of the bumper is necessary at all.
Also available is a carbon scoop to fit to the bumper and crash bar to optimize cooling. The modified bumper can be seen in the close up picture of the intercooler on the vehicle, and also the carbon scoop with modified bumper can be seen in the final picture of the front of the vehicle.
PURCHASE OF THIS INTERCOOLER KIT MUST BE MADE THROUGH LITCHFIELD MOTORS.
Email: info@litchfieldmotors.com
Telephone: +44(0)1684 850999
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Dominator Intercooler for Nissan GTR R35
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.