Description
Product Description
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
As we endeavour to continue our innovation, existing products are no exception. Therefore, we have now released the all new version of “FMDV004.” It has been difficult to improve upon this market leading design, but we have done just that, offering improved dual piston action with increased response time resulting in an very audible blow off sound when the throttle is lifted. In addition, we now include an extensive fitting kit for easy conversion from a stock recirculation valve to this compact blow off valve.
Highlights:
- Improved external aesthetics
- A myriad of incremental engineering enhancements to all internal components have been carried out to offer faster response times and longer service intervals
- The piston uses heat stabilised Viton O-rings
- A super durable and responsive aluminium piston
- A fully serviceable valve that is rebuildable in minutes
- Covered by the unique Forge Lifetime Warranty*
*Terms and conditions apply.
In the Box
1x FMDV15 Atmo Valve
1x Length of silicone hose
1x Silicone blanking cap
1x Brass T-Peice
1x 25mm Ally Blanking Plug
2x Hose clamps
10x Cable ties
1 x Forge Sticker
Please note that all Forge Motorsport Dual-Piston Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift. While we have incorporated many elements into the design of the Dual-Piston valves to aid in their compatibility with mass air-flow sensor equipped vehicles, we cannot always guarantee that everyone’s application will be compatible with a valve that vents the charge air into the atmosphere.
Forge Motorsport nor any of its Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Atmospheric Dump Valve for Micra IG-T 90 Tekna and Renault Clio 0.9 TCE
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.