An all alloy radiator for the Megane RS250/265/275.
With the known coolant temperature issues that are attributed to the original fitment radiator, this is the only real solution. The stock Renault radiator has a major design flaw in that the inlet and outlet are in a straight line across the core. At high engine rpm, when you need the most cooling, the maximum flow is straight across the core, missing out about 75% of the volume. Worse still, the 25% of the core with good flow is directly behind the crash bar and gets no direct airflow.
Our engineers have maximised the surface area and utilised a high efficiency radiator core with a unique flow enhancement, to ensure that the coolant passes evenly across the entire core, and that the area of restricted airflow (behind the crash bumper) is taken into account. Being confident in our design, we sent this for independent testing and were pleased to hear that they had achieved a reduction of 20°C in peak water temperatures,and also a drop of 15 °C in oil temperatures on the track.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.