Company: Forge Motorsport

Alloy Header Tank for the Nissan GTR R35

Product code: FMHTR35

Please select product options and quantities below:

Product Options:

Currency Converter Currency Converter

Description

Product Description

This replacement aluminium header tank fits in the stock location, with the stock bolts, uses all the stock hoses and stock radiator cap, yet adds 2 litres of extra coolant capacity inside the natural fill level of the engine i.e. you don’t have to overfill it to take advantage of the extra capacity.

It features a sight glass on the side to check the coolant levels, and is internally baffled to stop the coolant moving about too much during cornering, but also to reinforce the tank so that if you desire, it can use the 1.8bar SpecV radiator cap available from your GTR dealer. We offer this tank in crackle black finish only.

To purchase this product, or for further information, please contact:

Litchfield Motors
Email: info@litchfieldmotors.com
Telephone: +44(0)1684 850999

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Tags

Nissan

Warranty

Warranty Information

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please contact our customer service team.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

Shipping

Shipping Information

Shipping Charges & Services

We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.

Associated Products