This uprated intercooler replaces the original front mounted intercooler. It can either be used on its own or in combination with our "Twintercooler" kit. The intercooler uses a 650x400x50mm Bar and Plate core to full effect. We conducted testing on standard vehicles and those running larger turbos at 400hp.
On the standard car the intercooler achieved +10hp, +29 ft/lbs and a reduction in the inlet temperature of over 20°C. Where this really comes into its own, is on tuned engines, where the gains are even more impressive. The inlet and outlet tubes are 63mm which means our twintercooler hoses will fit, with the bayonet coupler removed or for those installing without our twintercooler kit, we include our FMKT010 silicone hoses for an easy installation.
PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.