The kit is suitable for the Citroen DS3 1.6 Turbo,the Peugeot RCZ THP 156 and the 207 GT/GTi We use a custom designed Silicone Hose combined with a non-oiled Pipercross foam high flow filter . Everything needed is supplied in the kit, including the highest quality stainless steel clamps.
Our Dyno testing of this kit showed improvements of 6 horsepower over the stock airbox on a standard engine with greater improvements on tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, if you desire even more performance, this has to be the perfect choice. The filter is located directly in front of the cold air duct into the engine bay. This kit also significantly tidys up the engine bay by removal of the OEM airbox and associated cold air ducting.
A replacement filter for this product can be bought here
PLEASE NOTE: THIS PRODUCT WILL NOT FIT THE DS3 RACING/DS Automobiles DS3
*Please note - the Pipercross filter is excluded from the Forge lifetime warranty*
FOR FILTER REPLACEMENT PLEASE CLICK HERE:
Please watch our video on how to fit an air filter without damaging it.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.