After extensive development and testing we have created a pair of front adjustable suspension top mounts for the Hyundai i30N and Veloster N platform. Machined using billet 7075 aluminium and hard anodized to provide a factory appeal finish whilst also protecting the top mounts from any surface corrosion.
The adjustable top mounts allow adjustments from +1.5° of positive camber all the way down to -2° of negative camber, giving you full adjustment to tailor the cars alignment to whatever your application requires, this ensures the geometry of your vehicle can be finally
No cutting or drilling required
Tuned for perfect track handling.
Tuned for perfect track handling. Our adjustable top mounts make use of a spherical bearing as it is best suited for applications where considerable camber or caster adjustments may be seen, the spherical bearing is also specifically designed to cope with the high loads and dynamic pressures that are seen through the daily use of the product.
With a factory fit with no cutting or drilling required you are able to remove the standard factory strut top and simply refit the Forge Motorsport to the OEM suspension to gain full adjustment of your camber whilst maintaining the factory electronic suspension control through the N system.
2-3 hours fitting - special tools required (spring compressor)
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.