Company: Forge Motorsport

Front Mounted Intercooler Kit for the Fiat 500/595/695 (*DOES NOT FIT AUTOMATIC CARS*)

Product code: FMINTF500
£567.00

Please select product options and quantities below:

Product Options:

Description

Product Description

*DOES NOT FIT AUTOMATIC CARS*

Designed for the Fiat 500 Abarth T-jet, a front mounting intercooler with all associated hoses, pipes, and fittings, that replaces the existing side mounted intercoolers. This unit was developed to be suitable for those running standard turbos and ECU software (standard vehicle + 10 hp, +10 ft/lbs torque) and also those with larger turbo conversions.

Whilst the factory set up using the two intercoolers in parallel is reasonably efficient, the removal of the long lengths of small-bore pipework, quickly lowers the circuit resistance, allowing you to benefit from the true capabilities of the turbocharger. Our development engineers have managed to increase the intercooler surface area by 100% and also increase the volume by 22%.

This improvement along with sitting the intercooler at the front of the vehicle to maximise air flow and cooling efficiency, we really do have winner!

This kit is available with red, blue, or black silicone hoses. Please select the colour required in the options above.

NO CUTTING OF THE VEHICLE IS REQUIRED TO FIT THIS INTERCOOLER

 

 

 

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Instructions

Warranty

Warranty Information

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please contact our customer service team.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

Shipping

Shipping Information

Shipping Charges & Services

We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.